edge Assembly Guide →

EDGE: Start Your E-bike

Press the power button (M) on the monitor display for 3 seconds. The monitor display and battery will turn on.

Once your monitor display is ON, verify that the Battery Indicator shows sufficient charge for your ride. If the battery does not have sufficient power for your ride, please refer to instructions on how to charge the battery.

Be sure to turn the bike and battery power off when not in use or while recharging.

START YOUR RIDE

Once you begin riding, you can choose the appropriate assistance level using the INCREASE PEDAL ASSIST [🔼] or DECREASE MOTOR ASSIST [🔽] buttons on your display.

The motor will assist you once you start pedaling. There are 3 levels of assistance on the display.

HEADLIGHT

Press and hold up arrow 🔼 for 3 seconds to turn on the headlight. Repeat to turn off the headlight.

NOTE

During riding, excessive braking and accelerating will deplete the battery faster. When in pedal assist mode the motor will stop assisting once you stop pedaling.

Your e-bike’s rated maximum load is 220lbs/100kg~ 265lbs/120kg including the rider.

Do not overload your e-bike.

WARNING

When walking the bike or no longer riding it is important to turn the battery off by pushing the power button next to the display screen. Otherwise, there is risk of activating the motor and the crank arm while pushing the bike which may lead to an accident. 

CAUTION

FOR YOUR SAFETY, PLEASE MAINTAIN AND CLEAN YOUR E-BIKE REGULARLY.